How to Update Firmware on Netgear Extender?

Want to update the firmware on your Netgear WiFi range extender? You have two options to get this job done. The first one is using the extender web interface on a computer by logging in to via IP 192.168.1.250. The second one is by accessing the Nighthawk app on the smartphone. We will help you update the firmware on your Netgear WiFi extender using both of these methods. This post covers the clear and easy to understand instructions for updating the Netgear extender firmware.

Netgear WiFi Extender Firmware Update Process

Use the instructions given below to get your WiFi extender updated to the recent firmware version using the web interface of the extender:

• Using Web Interface

In this, you log in to your Netgear extender using a computer or laptop. Find the steps below for the same:

1. Begin the process by checking the connection between the Netgear WiFi extender and the host router. Both devices should be firmly connected to each other.
2. You should also check that the devices are fully powered up. Fluctuating power supply can be a hindrance to the firmware update process. Thus, make sure that the extender as well as the host router are receiving a consistent power supply.
3. Now, get your PC connected to the Netgear WiFi extender’s network using its WiFi or LAN cable.
4. Visit the Netgear extender’s login page using the IP address or the login URL.
5. Insert the admin login details (username and password) in the respective fields and click on the Log In button.
6. You will land on the admin dashboard of your Netgear WiFi extender. This is also known as the Basic Home page.
7. Go to Settings and select Firmware Upgrade.
8. Now, click on Check Online.
9. If there is an update ready for your extender, then you will see it here.
10. Keep on following the instructions that appear on the screen and update your extender.

Your extender is now running on the most recent version of firmware. FYI, you can also execute this process manually. In that case, you first download the firmware file on your PC. You should download it from the official MyNetgear website. After that, log in and install the file on the extender.

We will now shed light on the second method to update your WiFi extender.

• Using the Netgear Nighthawk App

If you can not use your PC to update your extender, then using the Nighthawk app on your mobile phone is recommended to carry out the process. Use these steps:

1. Download and install the Netgear Nighthawk app on your mobile phone first.
2. You can download it from the application store on your phone.
3. Connect your phone to the extender’s WiFi using its SSID and password.
4. Once the app is downloaded, open it by tapping on its icon.
5. You will be navigated to the login page.
6. Key in the admin credentials in the fields and do the login.
7. Tap on the image of your Netgear extender.
8. Click on the three dots on the top right corner.
9. Now, tap on Check for Updates.
10. Tap Update and the firmware will begin updating on your WiFi range extender.

Do not disturb the firmware update process while it is going on. Stay on the same app till you see a prompt saying the Netgear extender firmware is successfully updated.

This completes updating the Netgear WiFi extender using the Nighthawk app.

In the End

This brings an end to our informative article on how to update the firmware on the Netgear wireless range extender. We hope you have updated your extender without getting stuck in between. In case you face an issue then reboot the devices and re-try the process. As soon as you have accomplished the task, you will notice an improvement in your extender’s performance. New features get added to it and also you will have a secure network. Make sure you keep an eye on the firmware updates released by Netgear. Whenever there is an update ready. Get it installed on the extender right away using the same steps given in this post.